Best thermal detection performance with simultaneous detection at 3 different points.
The TM 3/9 plus heat detector is a thermal sensor for simultaneous temperature detection in up to three different areas. A maximum of three temperature probes can be connected to the heat detector. The temperature switching point of the heat detector is not a fixed value and can be set within a wide range and configured. If the temperature at the measuring point exceeds the configured threshold temperature, an alarm signal is sent to the control console and this signal is visible until the temperature falls below the lower threshold value.
The TM3/9 plus detector is used for preventive monitoring of motor, fan, bearing, and other bearing temperatures; to monitor any abnormal heating caused by mechanical equipment failure and provide warnings before an incident occurs. It is an important element of preventive and predictive maintenance.
The spark and hot spot detection center allows remote configuration of the temperature detector and its monitoring. The temperature sensor functions are checked automatically at programmable intervals.
